Barco Projector 26-0313000-00 Benutzerhandbuch
160
Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
Output Menu
lìíéìí=jÉåì=cìåÅíáçåë
The following Output Menu functions are provided:
•
Destination
— indicates the destination on which you are currently working (as
selected on the Destination Bus). If multiple destinations are active, you can
select one of them using this field.
select one of them using this field.
•
Format
— sets the resolution and frame rate at which you want to drive your
projector(s). To minimize synchronization problems, select a frame rate that is
consistent with your input sources.
consistent with your input sources.
S
If you are using 59.94 NTSC video inputs, run the output at the same rate in
order to reduce jutter artifacts.
order to reduce jutter artifacts.
After selecting a format, press
{
APPLY FORMAT
}
to accept the selection. In
Appendix A, refer to the “
” section on page 375 for
details on all available resolutions.
•
Color Space
— sets the output’s color space, either RGB or YP
b
P
r
— per the
specifics of your projector.
•
For ScreenPRO-IIs with the EOC option installed, press {E OUT} to display the
Enhanced Output Menu
Enhanced Output Menu
. The label does not appear for SP-IIs that do not have
the option. Refer to the “
” section on page 161.
•
For VPs only, press {GLCK} to display the Genlock Menu. The label does not
appear for VPx destinations. Refer to the “
appear for VPx destinations. Refer to the “
” section on page 164
for details.
•
Press
{
APPLY FORMAT
}
to accept a selected output format.
•
Press {SETTINGS} to display the Settings Menu. Refer to the “
section on page 165 for details.
•
Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “
” section on page 166 for details.
•
Press {WIDE SCREEN} to display the Wide Screen Menu. Refer to the “
” section on page 167 for details. This softkey label only
appears when a widescreen destination is selected.
lìíéìí=pìÄ=jÉåìë
The following sub menus can be accessed from the Output Menu:
•
•
•
•
•
Note
A selected Processor destination can be configured as a
single screen or multiple screens (in a widescreen
application). In this situation, all changes to the Output
Menu
single screen or multiple screens (in a widescreen
application). In this situation, all changes to the Output
Menu
affect all Processors in a widescreen definition.
ScreenPRO-II destinations are single screen.