Barco Projector 26-0313000-00 Benutzerhandbuch
166
Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
Output Menu
qÉëí=m~ííÉêå=jÉåì
From the Output Menu, press
{
TEST PATTERN
}
to display the Test Pattern Menu.
Figure 5-16. Test Pattern Menu (sample)
The Test Pattern Menu enables you to display test patterns for projector alignment.
•
Output Monitor
— selects the monitor(s) that are affected by the test pattern
settings, either All, Program 1, Program 2 or Preview.
•
Mode
— enables you to turn test patterns on or off.
•
Type
— sets the test pattern. Choose between H Ramp, V Ramp, 100% Color
Bars
, 16x16 Grid, 32x32 Grid, Burst, 75% Color Bars, 50% Gray, Gray Steps
1
, Gray Steps 2, White, Black, Red, Green, Blue and Gray Bars.
•
Raster Box
— when enabled, displays a raster box defined by the exact outer
edges of the selected output resolution.
S
If the output is 1024 x 768, the raster box encapsulates that format.
Please note:
~
The Burst test pattern is the only pattern that is smaller than the selected
output resolution. When the Raster Box is enabled, the Burst pattern
will appear within its boundaries.
output resolution. When the Raster Box is enabled, the Burst pattern
will appear within its boundaries.
~
The Raster Box can be enabled when the test pattern is Off.
•
Alignment Test Pattern
— this field appears in wide screen mode only.
~
Select Off to turn the alignment test pattern off.
~
Select Hor to display a test pattern of horizontal lines.
~
Select Ver to display a test pattern of vertical lines.
~
Select Both to display a test pattern of both horizontal and vertical lines.
•
Press {WIDE SCREEN} to display the Wide Screen Menu. Refer to the “
” section on page 167 for details. This softkey label only
appears when a widescreen destination is selected.
Mode
B
A
C
K
A
C
K
N
A
V
A
V
A
D
D
J
TEST PATTERN
Output Monitor
All
ON
Raster Box
On
Type
Burst
Alignment Test Pattern
Off
WIDE
SCREEN