Barco Projector 26-0313000-00 Benutzerhandbuch

System Menu

Press 

{

}

to remove the selected VP, VPx or ScreenPRO-II (on the VP 

 line) from the current destination configuration.

Press 

{

}

to remove all units from the current destination.   

From the Destination Setup Menu, select an Aux destination type, then press {AUX 
SETUP}

 to display the Aux Setup Menu.  Please note: 

The {AUX SETUP} button appears when an Aux, ImagePRO Aux or PrePRO-II 
Aux 

destination is selected on the Destination Setup Menu.  

The Aux Setup Menu changes, depending upon the selected type of destination.

In Chapter 1, refer to the “

” section on page 27 for 

examples of each Aux destination “type.”

When a standard Aux destination “type” is selected on the Destination Setup Menu, the 
Aux Setup Menu

 appears in this form:

 

Figure 5-32.  Aux Setup Menu — Aux Destination (sample)

The following functions are provided:

 — displays the type of Aux destination and its number. 

 — two selections are available:

 — maps Aux sources according to how your inputs are 

patched to buttons in the console’s Source Selection section.  

 — maps Aux sources according to how your inputs are 

connected to the router. 

 — selects the router from which the Aux sources will be output.

If you have defined a destination as a Wide Screen, 
preliminary wide screen setup information will be sent to the 
VP and VPx units when you exit this menu.