Barco Projector 26-0313000-00 Benutzerhandbuch
192
Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
System Menu
•
Press
{
NEXT IP QUAD
}
to advance to the next 3-digit set of numbers in the
address. Use the ADJ knob in the normal manner to change the digits.
•
Press
{
TEST COMM
}
to test communications with the defined router:
~
If the test is successful, a “ROUTER CONNECTED” message will
appear that includes the Router name and version.
appear that includes the Router name and version.
~
If the test is unsuccessful, a “ROUTER FAILED” message will appear. In
this condition, re-check all connections and settings, and repeat the test.
this condition, re-check all connections and settings, and repeat the test.
RS-232 Setup Menu
On the Router Specification Menu, when Communication Type is set to RS-232, press
{
COMM SETUP
}
to display the RS-232 Setup Menu:
Figure 5-38. RS-232 Setup Menu (sample)
The RS-232 Setup Menu enables you to set the router’s RS-232 baud rate only. All other
parameters are fixed.
parameters are fixed.
•
Baud Rate
— sets the desired baud rate (9600, 14400, 19200, 28800, 38400,
57600
, 115200).
•
Data Bits
— fixed at 8.
•
Parity
— fixed at None.
•
Stop Bits
— fixed at 1.
•
Press
{
TEST COMM
}
to test communications with the defined router:
~
If the test is successful, a “ROUTER CONNECTED” message will
appear that includes the Router name and version.
appear that includes the Router name and version.
~
If the test is unsuccessful, a “ROUTER FAILED” message will appear. In
this condition, re-check all connections and settings, and repeat the test.
this condition, re-check all connections and settings, and repeat the test.
B
A
C
K
A
C
K
N
A
V
A
V
A
D
D
J
RS232 SETUP
Baud Rate
115200
[ 8 ]
Data Bits
[ NONE ]
Parity
[ 1 ]
Stop Bits
TEST
COMM