Barco Projector 26-0313000-00 Benutzerhandbuch
200
Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
Miscellaneous Menu
To enter a new code (for both Controllers), use the first eight numbered buttons on
the Preset Bus, and then confirm the new code.
the Preset Bus, and then confirm the new code.
In Chapter 7, refer to the “
instructions on using the Controller Panel Lockout mode.
bafa=asf=fåéìí=cçêã~í=jÉåì
From the Miscellaneous Menu, press
{
EDID
}
to display the EDID DVI Input Format
Menu
:
Figure 5-46. EDID DVI Input Format Menu (sample)
The EDID DVI Input Format Menu enables you to update the system’s preferred EDID
resolution for the DVI inputs — for the selected destination bus.
resolution for the DVI inputs — for the selected destination bus.
Extended Display Identification Data (EDID) is a VESA standard data format that contains
information about a display device and its resolution, both preferred and allowed. The
system’s EDID file is stored in non-volatile memory. This file is read by an external
computer’s DVI graphic card when the computer’s DVI output is connected to Encore via
the DVI-I connector during boot-up. The Encore Video Processor must be powered on first
for the EDID information to be read.
information about a display device and its resolution, both preferred and allowed. The
system’s EDID file is stored in non-volatile memory. This file is read by an external
computer’s DVI graphic card when the computer’s DVI output is connected to Encore via
the DVI-I connector during boot-up. The Encore Video Processor must be powered on first
for the EDID information to be read.
The following functions are provided:
•
Destination
— sets the destination on which you want to program EDID.
•
Format
— selects the preferred DVI video format with which you want to program
the Encore Presentation System’s EDID non-volatile memory
•
Current
— displays the current EDID video format that resides in memory.
•
Press {PROGRAM EDID} to program EDID with the new selected format. A
warning message will be shown.
warning message will be shown.
B
A
C
K
A
C
K
A
D
D
J
EDID DVI Input Format
PROGRAM
EDID
select the desired format and
select Program EDID.
Current EDID format
FORMAT:
1280 x 1024 @ 60
To change EDID for DVI inputs,
Destination
ALL
1280 x 1024 @ 60
Note
This menu is designed for advanced users only. Do not
program EDID unless it is necessary.
program EDID unless it is necessary.