Barco Projector 26-0313000-00 Benutzerhandbuch

Miscellaneous Menu

From the Miscellaneous Menu, press 

{

}

 to display the Backup/

:

Figure 5-50.  Backup/Restore Menu  (sample) 

The Backup/Restore Menu enables you to back up and restore system configurations, 
using the console’s Flash Memory Card capability.  You can also use this capability to 
transfer configurations between Controllers.   

The following functions are provided:

 — Selects the device(s) that you want to backup or restore.  Choose 

between the Ctrlr, VP+SP or Ctrlr+VP+SP.

 — Selects which portion of the selected devices you want to 

backup or restore.  Choose between All, System or Presets. 

 — Selects the device(s) that you wish to restore.  Choose 

between All devices, or the ID of a specific device (e.g., 1, 2, 3).

Press {BACKUP} to perform a backup operation to the Flash Memory Card using 
the selected device(s) and options.  

Press {CHECK CARD} to check for the presence of a Flash Memory Card:

If no card is present, the message “Flash card not detected” is shown.

If a memory card is present, the Current Backup Menu appears.  Refer 
to the “

” section on page 207 for details. 

Press {RESTORE} to restore a system configuration from the Flash Memory Card 
to the selected device(s).

In Chapter 7, refer to the “

” section on page 353 for 

instructions.

You can only store one system configuration on a Flash 
Memory Card.