Barco Projector 26-0313000-00 Benutzerhandbuch
Encore Presentation System • User’s Guide • Rev 04
235
5. Menu Orientation
Source Adjustment Menus
pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë
The following Source Adjustment Menu functions are provided:
•
H Size
— adjusts the source’s horizontal size. The “%” value indicates size as a
percentage of the original PIP or Key’s horizontal resolution. The numeric value is
the source’s width in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE
knob. See the “
the source’s width in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE
knob. See the “
•
V Size
— adjusts the source’s vertical size. The “%” value indicates size as a
percentage of the original PIP or Key’s vertical resolution. The numeric value is
the source’s height in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE
knob. See the “
the source’s height in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE
knob. See the “
•
H Position
— indicates the source’s horizontal position, relative to its default
horizontal position (00) with no offset. Thus, the value 50 is 50 pixels to the right
of its default position. To adjust, move the Joystick left and right along the X-Axis.
of its default position. To adjust, move the Joystick left and right along the X-Axis.
•
V Position
— indicates the source’s vertical position, relative to its default vertical
position (00) with no offset. Thus, the value -10 is 10 pixels below its default
position. To adjust, move the Joystick up and down along the Y-Axis.
position. To adjust, move the Joystick up and down along the Y-Axis.
•
Move Rate
— adjusts the rate (in 0.1 second increments) for programmed Key or
PIP movement, from keyframe to keyframe. To adjust, select the RATE radio
button and twist the Joystick Z-Axis knob.
button and twist the Joystick Z-Axis knob.
•
Key Frame Effect
— indicates the “motion type” that is used to move the PIP or
Key from point to point.
~
If no move is programmed, the display reads [N/A].
~
If a move is programmed, the motion type is shown (e.g., [Linear]). The
motion type is selected on the Effects Menu.
motion type is selected on the Effects Menu.
For Input Source Adjustments:
•
Press
{
BORDR
}
to display the Border Menu. Refer to the “
section on page 218 for details.
•
Press
{
SHDOW
}
to display the Shadow Menu. Refer to the “
”
section on page 219 for details.
•
Press
{
EFX
}
to display the Image Effects Menu. Refer to the “
” section on page 220 for details.
For Key Source Adjustments:
•
Press
{
STATS
}
to display the Status Menu. Refer to the “
” section
on page 212 for details.
•
Press
{
KEY
}
to display the Key Menu. Refer to the “
”
section on page 225 for details.
•
Press
{
MATTE
}
to display the Matte Menu. Refer to the “
page 228 for details.
•
Press
{
EFX
}
to display the Image Effects Menu. Refer to the “
” section on page 220 for details.