Barco Projector 26-0313000-00 Benutzerhandbuch
302
Encore Presentation System • User’s Guide • Rev 04
7. Operations
Prerequisites
mêÉêÉèìáëáíÉë
Prior to reviewing this chapter, please ensure the following:
•
All system destinations are properly configured. In Chapter 6, refer to the
“
“
" section on page 277 for details.
•
All system inputs (sources) are properly configured. In Chapter 6, refer to the
“
“
" section on page 293 for details.
•
All system backgrounds are properly configured. In Chapter 6, refer to the
“
“
" section on page 291 for details.
•
on page 296 for details.
•
Ensure that you are familiar with the Controller. In Chapter 4, refer to the
“
“
" section on page 107 for details.
•
Ensure that you are familiar with all menus. In Chapter 5, refer to the following
sections for details:
sections for details:
~
Refer to the “
" section on page 213 for details on
all PIP adjustment menu items.
~
Refer to the “
" section on page 224 for details on all Key
adjustment menu items.
~
Refer to the “
" section on page 232 for
details on all input source adjustment parameters.
Tip
As you review each function, it is recommended that you
practice each feature on the Encore itself — using a fully
configured system consisting of Program and Preview
monitors, projector(s), and all the required destinations,
sources and backgrounds.
practice each feature on the Encore itself — using a fully
configured system consisting of Program and Preview
monitors, projector(s), and all the required destinations,
sources and backgrounds.
Note
In this chapter, when a sequence of menu selections is
required to complete a given procedure, the ">" symbol is
used to divide each successive menu pick.
required to complete a given procedure, the ">" symbol is
used to divide each successive menu pick.
S
To access the Genlock Menu, press
OUTPUT
OUTPUT
> {GLCK}.