Barco Projector 26-0313000-00 Benutzerhandbuch
328
Encore Presentation System • User’s Guide • Rev 04
7. Operations
Working with Layers
jçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã
Encore enables you to modify layers directly on Program, without first setting up a "look" on
Preview. The mode is typically used for creating a "look" on Program (especially in
conjunction with a large screen projector), when the Preview monitor may be too small to
realize the desired result.
Preview. The mode is typically used for creating a "look" on Program (especially in
conjunction with a large screen projector), when the Preview monitor may be too small to
realize the desired result.
Use the following steps to modify layers directly on Program:
1.
In the System Keypad, press SYSTEM to display the System Menu.
2.
Scroll to the Modify Layers On Program line and turn the mode ON. You can
now change PIPs and Keys directly on Program.
now change PIPs and Keys directly on Program.
Please note:
•
When you switch sources directly on Program, you may notice a glitch in the
image as the scalers recall the source’s file.
image as the scalers recall the source’s file.
•
If you use camera inputs in this mode, it is recommended that you use an external
Genlock
Genlock
signal. Refer to the "
" section on
page 309 for details on source files.