BSS Audio MC-1 Benutzerhandbuch
2
BSS Audio 800-931-2357 8760 South Sandy Parkway, Sandy, Utah 84070
www.bssaudio.com 800-931-2357
3
Installation
Set the 6-position switch
The 6-position switch is located
on the side of the media
converter.
•
Use a small flat blade
screwdriver to set the
recessed switches.
•
All switches are shown in
the default position, UP.
Note: Switch positions S2 and S3 work together to configure the media
converter for Pause conditions.
S1 Remote-Fault Detection
up
Disabled
down
Enable
S2 & S3 work in combination
Pause
10 sw position 2 up and 3 down:
Symmetric
01 sw position 2 down and 3 up:
Asymmetric
11 sw positions 2 and 3 up:
Pause is OFF (default position)
00 sw positions 2 and 3 down:
Symmetric and Asymmetric
S4 Transparent Link Pass-Through
up
Enable Link Pass-Through
down
Disable Link Pass-Through
S5 Fiber Auto-Negotiation
up
Disable Fiber Auto-Negotiation for the fiber link
(default setting)
down
Enable Fiber Auto-Negotiation for the fiber link
S6 Loop Back
up
Disable RX/TX signal loop back (default setting)
down
Enable RX/TX signal loop back
2. Pause (symmetric)
3. Pause (asymmetric)
4. Transparent Link Pass-Through
5. Auto-Negotiation
1. Remote Fiber Fault Detect
6. Loop Back