Braun 34443 Benutzerhandbuch

Page 32

1.  Connect chair 
hook to a solid 
frame member of 
the wheelchair (as 
shown in Photo E).

2.  Position and 
connect belt keeper 
fitting (attachment) 
to appropriate track 
anchorage point 
(slots).  Attach 
keeper as detailed 
on page 29.  

Pull firmly on belt 
to ensure fitting is 
locked in track.  

Note:  Belt angles 
should be as shown 
in Figure 2 on page 
28.

3.  With buckle open, 
pull loose end of belt 
until tight (see Photo 
G).  While holding 
the loose end with 
one hand, close the 
lever of the clamp 
(buckle) down until it 
locks.  See Photo H.

4.  Connect Velcro

™

 

tabs to keep excess 
belt off floor.  See 
Photo I).

Repeat procedures 
for all belts.  

Note:  Check to see 
that front and rear 
belts are tight and 
the chair is secure 
enough that it does 
not have any move-
ment.  Lock wheel-
chair brakes.  

Belt Release:  Press 
lever clamp (lock) to 
release tension on belt.

Keeper

Hook

Velcro

™

 

Tabs