Braun 34443 Benutzerhandbuch

Page 45

Note:  Removal of the passenger 
side section of the seat is prohib-
ited*.  Policy detailed on previous 
page.

1.  From the rear of the vehicle, fold 

down the back of the bench seat 
(pull release strap #1).  

2.  Pull the release strap at the rear 

of the seat (between seat base 
and floor), and lift and fold (tip) 
the seat forward.  Note:  Push 
top of linkage rod forward to sta-
bilize seat (over center position)  

3.  Remove the bolt securing the 

linkage arm to the floor-mounted 
bracket.

4.  Remove E-ring retaining clips 

from the pivot pins securing the 
front floor mounts. 

5.  Remove the pivot pins.

6.  Carefully remove seat.

Reverse removal procedures.

Pivot Pin

E-Ring Retaining Clip

Linkage Arm

Securement Bolt

(40) Section

(60) Section Controller Assembly