Boundless Technologies 4000 Benutzerhandbuch
26 Setup
AUXiliary/COMMunications Menu (Sess 2 - AUX)
EXEC1
GLOBAL COMM1
AUX/COMM2
KEYBOARD1 SCREEN1
VISUAL1 MODE1 TAB1 FUNCT1
BELL
Mode
Block H-Blk
FDX/Line HDX/Echo
Baud Rate
19200
9600
4800
2400
2000
1800
1200
600
300
150
134.5
110
Parity Odd
Odd
Even
Space
Mark
Parity Check
Yes
No
Data/Stop Bits
7/1
8/1 7/2 8/2
Xon/Xoff None
DTR
DC1/DC3 Both
Aux Echo
Yes
No
Pace
00
Terminator
US/CR
CRLF/ETX
XPC
Off
On
ENTER:menu
↑
↓
:line
←
→
SPACE:select
S-SETUP:exit CTL-SETUP:SES#1
Mode
[Block, H-Blk, FDX/Line, HDX/Echo]
Four selections are available for defining communication protocol.
Baud Rate
[19200, 9600, 4800, 2400, 2000, 1800]
A wide range of baud rates are available to match the data rate for your printer/host.
Parity
[Odd, Even, Space, Mark]
Four selections are available to meet the requirements of your printer/host.
Parity Check [Yes, No]
When Yes is selected, an asterisk (*) symbol will be displayed on your screen at any
character position where an error in parity is detected by the terminal on incoming
data.
character position where an error in parity is detected by the terminal on incoming
data.
Data/Stop Bits
[
7/1
, 8/1, 7/2, 8/2]
Select 7 or 8 bit character operation with either 1 or 2 stop bits appended at the end of
a character.
a character.
Xon/Xoff [None, DTR, DC1/DC3, Both]
Select DTR, DC1/DC3 or both for data flow control for received character text. Flow
control must be used when using smooth scroll.
control must be used when using smooth scroll.