Bosch Appliances Radio LE10 Benutzerhandbuch

LE10 Radio Receiver

Programming | en

Bosch Security Systems

User Manual

F.01U.278.517 | V2.0 | 2012.11

To enter programming mode, press simply button T1 for the 

desired time. See Section 4.1 Connecting ports, page 11.

–

Press button T1 for min. 1 second and max. 3 seconds.

–

The green LED stays permanently on.

–

The red LED blinks slowly for maximum 30 seconds.

Within these 30 seconds, activate the transmitter that you want 

to match, the following behavior should be observed:

–

The green LED and the red LED blink alternating for 6 

seconds.

This indication confirms that the transmitter is programmed. 

–

If the transmitter is already programmed, then the red LED 

blinks fast for 6 seconds after activating the transmitter.

–

If 20 transmitters are already programmed, then the red 

LED blinks fast for 10 seconds directly after activating the 

button T1 between 1 and 3 seconds.

You can repeat the sequence with another transmitter.

Both relays will not be activated in the programming mode. 

Per programming sequence only one transmitter can be 

matched. You can program up to 20 transmitters.