Berkel E-222 Benutzerhandbuch

Select a solid, level surface to install the E-222 chopper.  This area should be well lit and large
enough to allow easy access to all sides of the machine.

Your E-222 chopper is manufactured with a 20-amp power cord and plug.  Contact a licensed elec-
trician to install a 20-amp outlet.  Do not try to modify a standard outlet to accommodate this plug.
Failure to use a correct outlet will void the warranty.  Also, check that the line voltage matches the
motor specifications as shown on the serial plate.

The Berkel E-222 chopper is suitable to cut and chop the following products:
•

Meat

•

Poultry

•

Fish

The Berkel E-222 chopper is not designed to cut and chop the following products:

•

Non-food products

•

Dry products

•

Meat with bones

1. Make sure the chopper is unplugged and is on a solid, level surface.

2. Check that the line voltage at the outlet matches the machine specifications.

3. Choose a knife and plate to install.  (If you have just removed the chopper from its shipping

carton, it is greased and ready to run with a 1/8” plate from the factory.)  The standard plate has
1/8” (3.2mm) holes.  Optional plates are 3/16” (4.8mm), ¼” (6.3mm), and 3/8” (9.5mm).  It is
recommended that a plate and knife should be matched and kept as a pair.  They will wear evenly
and provide the best operation of the chopper.

CAUTION

Mixing knives and plates will cause them to

wear unevenly and possibly damage each other.