BeefEater Barbecue Benutzerhandbuch

1.  Check that all gas hose fittings and connections are 

spanner tight. Gas regulators that are fitted with a hand 
tightening wheel should be checked to ensure that the 
connection is secure. 

2.  Check that control knobs are in the Off position. Note 

that when in the Off position the knob is locked for 
safety and can only be operated by pressing before 
turning. 

3.  Open the roasting hood fully or remove the weather 

cover/lid from the cooking surface before operating the 
barbecue.

4.  Clean cooking surfaces thoroughly before use.
5.  Check gas supply

. Turn on gas supply at either the 

cylinder (for Propane / LPG) or shut-off valve (for 
Natural Gas).

1.  Push in and hold the control knob down while turning 

slowly in a counter-clockwise direction until the starter 
mechanism engages at the two o’clock position.  At this 
time the gas will start to flow. 

 There is a safety lock that prevents the knob from 

being turned on accidentally

. You must push the knob in 

completely to disengage the lock. 

2.  Hold the control knob in while continuing to turn the 

knob to the High or twelve o’clock position.

3.  The starter mechanism will click and the main burner 

will now light. Continue turning the knob slowly until it is 
in the twelve o’clock position. 

4.  If the burner is alight, release the knob. 

: If the burner does not light, keep the control knob 

pushed in and turn the control knob in a clockwise 
direction to return to the Off position. Wait 5 minutes for 
the gas to disperse and then repeat steps 1-4.

5.  The control knob can now be turned to the desired heat 

setting - Low, Medium or High.

The control knob does not need to be pushed in while 

selecting the heat setting.

Push in and hold the control knob while turning in a 

clockwise direction until the Off position is reached.

1.  Be sure to turn off all control knobs and cylinder valve 

(for Propane - LPG) or shut-off valve (for Natural Gas).

2.  Clean drip tray, griddle plates and grills if necessary

.

Allow barbecue to cool before replacing the weather cover/

lid or any polyester barbecue cover.

Lighting Instructions
Press and turn knob slowly to HIGH
If ignition does not occur return
to OFF and repeat after 5 minutes

Lighting Instructions
Press and turn knob slowly to HIGH
If ignition does not occur return
to OFF and repeat after 5 minutes

Lighting Instructions
Press and turn knob slowly to HIGH
If ignition does not occur return
to OFF and repeat after 5 minutes

Lighting Instructions
Press and turn knob slowly to HIGH
If ignition does not occur return
to OFF and repeat after 5 minutes

Push in

Hold

Release

Adjust 
High - Low 
Setting