Baumatic BDW13 Benutzerhandbuch
DISHWASHER MUST
BE LEVEL FOR
BE LEVEL FOR
LEVELLING YOUR DISHWASHER
AND INJURE YOU!
FOR HELP!
33
BAUMATIC BDW13, BDW14 dishwasher user manual
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
WARNING!
BE CAREFUL WHILE YOU ARE
PROPER DISH RACK
IN PLACE – IT COULD TIP OVER
OPERATION AND
WASH
CONSULT THE FIGURE BELOW
PERFORMANCE.
THE REAR FEET CAN BE ADJUSTED FROM THE FRONT OF THE DISHWASHER BY TURNING THE SCREWS ON THE
LEFT AND RIGHT HAND SIDES OF THE CABINET. TO ADJUST THE FRONT FEET, USE A WRENCH / SPANNER AND
TURN THE FRONT FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE ‘REMARK B’ IN THE ABOVE FIGURE).
WHEN YOU ROTATE THE ADJUSTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
(PLEASE SEE ‘REMARK A’ IN THE ABOVE FIGURE). PLEASE NOTE THAT THE FRONT LEVELLING FEET ARE
TURN THE FRONT FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE ‘REMARK B’ IN THE ABOVE FIGURE).
WHEN YOU ROTATE THE ADJUSTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
(PLEASE SEE ‘REMARK A’ IN THE ABOVE FIGURE). PLEASE NOTE THAT THE FRONT LEVELLING FEET ARE
HELD TO THE APPLIANCE BY LOCKING NUTS. PLEASE HANDLE THESE WITH CARE WHEN INSTALLING.
CAUTION
:
IT IS IMPORTANT THAT YOU RAISE THE BACK OF THE DISHWASHER WHILE YOU ARE LEVELLING THE
REAR FEET. THIS CAN BE ACHIEVED USING A LEVER AND FULCRUM. TAKE GREAT CARE WHEN
BAUMATIC WILL NOT BE
ATTEMPTING TO MOVE OR TILT YOUR DISHWASHER IN ANY WAY.
:
NOTE
LIABLE FOR ANY INJURY OR DAMAGE INCURRED WHILST YOU ATTEMPT TO MOVE YOUR DISHWASHER.
k)
THE DISHWASHER MUST NOW BE SECURED
IN PLACE
. THERE ARE TWO WAYS TO DO THIS, DEPENDING ON YOUR TYPE OF WORK
SURFACE. REMEMBER THAT YOUR DISHWASHER’S WEIGHT MUST REST ON ITS FEET. THE
FASTENINGS AT ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FORWARD:
FASTENINGS AT ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FORWARD:
NORMAL WORK SURFACE - SECURE TO THE WORK SURFACE’S UNDERSIDE BY USING TWO
WOODSCREWS ENSURING THAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
WOODSCREWS ENSURING THAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
MARBLE OR GRANITE WORK TOP – FOR THESE WORKTOPS, YOU WILL NOT BE ABLE TO
SECURE THE TOP OF THE DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
BECAUSE OF THIS, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
DISHWASHER CABINET AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
RUBBER CAP OVER THE SCREW.
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSURE
YOUR DISHWASHER’S WEIGHT RESTS ENTIRELY ON ITS FEET.
SECURE THE TOP OF THE DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
BECAUSE OF THIS, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
DISHWASHER CABINET AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
RUBBER CAP OVER THE SCREW.
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSURE
YOUR DISHWASHER’S WEIGHT RESTS ENTIRELY ON ITS FEET.
33