Baratza Forte-AP Benutzerhandbuch
11
Forte
TM
Manual
Weight-Based Grinding Operation
Select WEIGHT, then insert the coffee
bin on the load cell and press TARE.
Then press one of the preset buttons
(1,2,3). The screen will show the pre-
programmed grind weight in grams.
Press START to begin grinding.
bin on the load cell and press TARE.
Then press one of the preset buttons
(1,2,3). The screen will show the pre-
programmed grind weight in grams.
Press START to begin grinding.
While grinding, the screen will display
in real-time, the weight of coffee in the
grounds bin. When the screen reaches
the programmed weight (+/- 0.2g), the
motor will stop and the screen will
show the actual weight in the grounds
bin for 3 seconds, then the screen will
reset to the programmed weight. The
grinder will only allow a maximum of 120g to be ground at one time. At any
time, during grinding, you can stop the unit by pressing the STOP button. The
motor will stop and the screen will reset to the selected preset weight. You can
also press M (Manual) grinding, and use the START and STOP buttons to grind
to the desired weight to a maximum of 120g.
in real-time, the weight of coffee in the
grounds bin. When the screen reaches
the programmed weight (+/- 0.2g), the
motor will stop and the screen will
show the actual weight in the grounds
bin for 3 seconds, then the screen will
reset to the programmed weight. The
grinder will only allow a maximum of 120g to be ground at one time. At any
time, during grinding, you can stop the unit by pressing the STOP button. The
motor will stop and the screen will reset to the selected preset weight. You can
also press M (Manual) grinding, and use the START and STOP buttons to grind
to the desired weight to a maximum of 120g.
Time Based Grinding Operations
Select TIME and place the PortaHolder over the load cell, or place the ground
coffee bin on the load cell. Press the desired button (1,2,3). The screen will show
the corresponding programmed grind time in seconds. Press START button to
begin grinding. While grinding, the screen will count down the seconds to 0.0.
When the screen reaches 0 seconds, the motor will stop and the display will
coffee bin on the load cell. Press the desired button (1,2,3). The screen will show
the corresponding programmed grind time in seconds. Press START button to
begin grinding. While grinding, the screen will count down the seconds to 0.0.
When the screen reaches 0 seconds, the motor will stop and the display will
All Weight and Time settings are made
using the touch screen.