Bad Boy Mowers BAD BOY 02.9812.0001C Benutzerhandbuch
B
AD
B
OY
™ S
POT
L
UMINAIRE
U
SER
M
ANUAL
7 0
02.9812.0001C
Replacing the Lamp
Parts:
71.2566.1200.0 1 EA LAMP, FASTFIT, PHILIPS MSR GOLD™
Tools and Supplies:
Cotton gloves or finger cots
WARNING: Remove power from luminaire before performing any maintenance procedures.
CAUTION: Refer to
on page 58 before handling the lamp.
To replace lamp:
Step 1. Remove power from lamp and allow lamp to cool for at least 5 minutes.
Step 2. Remove power from luminaire.
Step 3. At rear of luminaire, rotate backcap counter-clockwise to remove (it will still be connected
Step 1. Remove power from lamp and allow lamp to cool for at least 5 minutes.
Step 2. Remove power from luminaire.
Step 3. At rear of luminaire, rotate backcap counter-clockwise to remove (it will still be connected
by a tether). Refer to
on next page.
Step 4. Remove existing lamp by rotating lamp base counter-clockwise and pulling straight out of
backcap.
Step 5. Position new lamp as shown in
DETAIL A and insert into rear bulkhead. Rotate
45 degrees clockwise to lock in place. You will hear a click when properly seated.
Step 6. Replace backcap.
Step 7. Reset Lamp Hours. (Refer to
Step 7. Reset Lamp Hours. (Refer to
Step 8. Optimize lamp. (Refer to