Woodstock SHOP FOX W1668 Benutzerhandbuch
-
8
-
Figure 6. Components laid out for identification.
The following is a description of the components shipped with the Shop Fox
®
W1668 Oscillating Drill
Press. It is recommended that the components be laid out in a similar fashion to those in Figure 6. This
will help in identification before beginning assembly. Should any part be missing, examine the packag-
ing carefully and check under the belt guard. If any key parts are missing call Woodstock International
at 360-734-3482 or at tech-support@woodstockint.com.
will help in identification before beginning assembly. Should any part be missing, examine the packag-
ing carefully and check under the belt guard. If any key parts are missing call Woodstock International
at 360-734-3482 or at tech-support@woodstockint.com.
1.
Headstock Assembly
2.
Base
3.
Column
4.
Table
5.
Table Bracket
6.
Pinion Gear
7.
Clamp Shoe
8.
Hand Crank
9.
Dust Port
10. Drill Chuck and Key
11. Table Inserts (4)
12. Spindle Handles (3)
13. Belt Tension Lock Knob
11. Table Inserts (4)
12. Spindle Handles (3)
13. Belt Tension Lock Knob
14. Sanding Mandrel
15. Hex Head Bolts (4)
16. Phillips
16. Phillips
®
Head Screws (4)
17. Cap Screw
18. Mandrel Washers (4)
19. Allen
18. Mandrel Washers (4)
19. Allen
®
Wrenches (3)
20. Open End Wrench
21. Lock Handles (2)
22. Rack
23. Rack Ring
24. Belt Cover Knob
25. Machine Screw w/ Washer
26. Sanding Sleeves
27. Sanding Drums
28. Mandrel Nut
21. Lock Handles (2)
22. Rack
23. Rack Ring
24. Belt Cover Knob
25. Machine Screw w/ Washer
26. Sanding Sleeves
27. Sanding Drums
28. Mandrel Nut
ASSEMBLY INSTRUCTIONS