West Elm Teak bath faucet Montageanweisungen

Single Hole Lavatory Faucet

assembly instructions

Page 2 of 3

7627375 - 10.22.08

1. Be sure water supply lines are turned to the off position.  If applicable, remove existing faucet.

2. Clean surface of lavatory sink before installing new faucet.

3. Make sure drain in closed or blocked so that small parts do not fall into drain.

4. Install new faucet body assembly into the hole of the sink. Tighten mounting nut from underneath sink. Connect water supply line 

    to faucet.

5. Remove the aerator from faucet before using for the first time. Allow both hot and cold water to run for one minute. Replace aerator.

6. Use teflon tape to connect drain body to tube.  

7. Install drain of sink.