West Elm Natural Capiz Pendant Montageanweisungen
assembly instructions
natural capiz pendant
1577428
page 1 of 2
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to cool prior to
replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
·For your safety and convenience, assembly by two people is recommended
Assembly Instructions:
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE
BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay out on a
clear workspace.
3. Unscrew the socket ring (K) from the socket (H).
4. Place shade frame (I) onto the socket (H) then secure it by turning
the socket ring (K) in a clockwise direction.
3. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is
white or marked “N”. The HOT FIXTURE WIRE is black or marked “L”. The
yellow-green or bare wire is the GROUND WIRE.
Parts Enclosed:
• (38) Capiz shells (D) , including (2) extra
• (1) Mounting plate (E)
• (2) Canopy screws (F)
• (1) Canopy (G)
• (1) Socket (H)
• (1) Socket Ring (K)
• (1) Shade Frame (I)
Hardware Included:
• (2) Mounting screws (C)
• (1) Green ground screw (B)
• (3) Plastic wire connectors (A)
• (2) Canopy screws (C)
Important Safety Instructions:
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
•We strongly recommend that a professional electrician install all direct wire fixtures.
·This fixture has been rated for up to (1) 60-watt maximum TYPE A standard bulb (not included). To avoid the
risk of fire, do not exceed the recommended wattage.
To install you will need:
• Electrical tape
• Screwdriver