West Elm Metal Floor Mirror Montageanweisungen
A
B
C
drywall anchor 3x
screw 3x
mounting plate 1x
NOTICE! THIS IS A FLOOR MIRROR ONLY! THE HARDWARE
SUPPLIED WILL NOT SUPPORT HANGING THE MIRROR ON THE
WALL.
Stud mounting is recommended. Installation by 2 people is
recommended. For your safety, Use proper hardware for your
wall type, (such as anchors for drywall). When in doubt, consult
your local hardware store.
SUPPLIED WILL NOT SUPPORT HANGING THE MIRROR ON THE
WALL.
Stud mounting is recommended. Installation by 2 people is
recommended. For your safety, Use proper hardware for your
wall type, (such as anchors for drywall). When in doubt, consult
your local hardware store.
! For drywall mounting, use anchors with screws.
For stud mounting, use screws only.
1. Hold mirror at desired location. With a pencil,
mark on wall the top center of the mirror. This
mark will be used to determine the location of
the mounting hardware.
2. Hold the mounting bracket (C) in place on the
back of the mirror and measure down from the
top of the mirror frame to the holes in the
bracket. Record this measurement. Set bracket
aside. Measure down from the mark on the wall
from step 1. Place the bracket against the wall
and mark the through the holes onto the wall.
this is the insertion point for the hardware.
3. For stud mounting: skip to step 4. For drywall
mounting: using a Philips’s head screwdriver,
insert the drywall anchor (A) into the wall at the
insertion points. Press and turn clockwise until
anchor is fl ush with the wall.
4. Insert screw (B) thru the bracket (C) and into the
anchor or at the insertion point.
5. Place mirror over bracket sliding down to lock it
into place. Making sure the weight of the mirror
is on the fl oor and not hanging on the bracket.
THIS IS A FLOOR MIRROR ONLY!
For stud mounting, use screws only.
1. Hold mirror at desired location. With a pencil,
mark on wall the top center of the mirror. This
mark will be used to determine the location of
the mounting hardware.
2. Hold the mounting bracket (C) in place on the
back of the mirror and measure down from the
top of the mirror frame to the holes in the
bracket. Record this measurement. Set bracket
aside. Measure down from the mark on the wall
from step 1. Place the bracket against the wall
and mark the through the holes onto the wall.
this is the insertion point for the hardware.
3. For stud mounting: skip to step 4. For drywall
mounting: using a Philips’s head screwdriver,
insert the drywall anchor (A) into the wall at the
insertion points. Press and turn clockwise until
anchor is fl ush with the wall.
4. Insert screw (B) thru the bracket (C) and into the
anchor or at the insertion point.
5. Place mirror over bracket sliding down to lock it
into place. Making sure the weight of the mirror
is on the fl oor and not hanging on the bracket.
THIS IS A FLOOR MIRROR ONLY!
Care instructions: Wipe with a soft dry
cloth. To protect fi nish avoid the use of
chemicals and household cleaners.
cloth. To protect fi nish avoid the use of
chemicals and household cleaners.