West Elm Lacquer Shelves Montageanweisungen

laquered thin shelf

laqué plateau mince

plataforma delgada lacado

assembly instructions 

le fait de monter des instructions

instrucciones de montaje

Page  of 3

0/2/0

NOTE :

• Maximum Load is 10lbs for drywall and 20lbs for stud 

    mount.

• The hardware included is meant for drywall or 

   stud mounting only. 

• Designed to be used for decorative items only.

• Wipe with a soft, dry cloth. To protect the finish, avoid 

   the use of all chemicals and household cleaners. 

! For drywall mounting, use anchors with screws. For  

  stud mounting, use screws only. 

1. This shelf comes with a paper mounting pattern which

   can be used to locate the position of the shelf on your 

   wall and mark the insertion points of the mounting 

   hardware. The template outline indicates the line of the 

  shelf edge at the wall. The centerpoints are toward the 

  top of the shelf and indicate the point of insertion for

  the drywall anchors and screws.

2. Temporarily tape the mounting pattern to the wall with

    the outline indicating the desired location of the shelf. 

3. Using a pin, poke through the mounting pattern into 

    the drywall at the center points to mark the locations 

    on the wall. Remove the mounting pattern.

4. For stud mounting, skip to step 5. For drywall 

   mounting: using a phillip’s head screwdriver, insert the

   snapskru(a) into the wall at the insertion points. Turn 

   clockwise until snapskrus are flush with the wall. 

5. Put the screw hole on the metal hanging hardware 

   matching with snapskru(a). Insert screws(b) into screw 

   hole and anchors, and turn clockwise until screw and 

   product are flush with the wall. 

6. Align keyhole notches on the back of the shelf over the 

   screw head and slide the shelf down until it rests on the

   screws. Tighten or loosen screws as needed to fit the shelf

   snugly against the wall.

a. snapskru  2x

b. screw  2x