West Elm Globe Pendant Montageanweisungen

Important Safety Instructions:

·Stud mounting is recommended. Use proper hardware for your wall type. When in doubt consult your local hardware

store. For your safety, it is strongly recommended that two people hang the lamp.

·Electric bulb should be centered inside the pendant shade, making sure it does not touch the outer sides.

·These instructions are provided for your safety. It is important that they are read carefully and completely before

assembling fixture.

·This fixture has been rated for up to (1) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk of fire,

do not exceed the recommended wattage.

Important Safety Instructions:

·Stud mounting is recommended. Use proper hardware for your wall type. When in doubt consult your local hardware

store. For your safety, it is strongly recommended that two people hang the lamp.

·Electric bulb should be centered inside the pendant shade, making sure it does not touch the outer sides.

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does

not fit securely into your outlet, do not force it - contact a professional electrician. Use the plug with an extension cord

only if it can be fully inserted into the cord's socket. Never alter the plug in any way.

·These instructions are provided for your safety. It is important that they are read carefully and completely before

assembling fixture.

·This fixture has been rated for up to (1) 60-watt maximum TYPE A standard bulb (not included). To avoid the risk of fire,

do not exceed the recommended wattage.

assembly instructions

page 1 of 2

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off

and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.

·Keep flammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

·For your safety and convenience, assembly by two people is recommended

Parts Enclosed:

• (1) Mounting plate (E)

• (1) Canopy (F)

• (1) Screw cap (H)

• (1) Lamp Socket (G)

• (1) Socket Ring (J)

• (1) Shade Canopy (I)

• (1) Glass Shade(K)

Hardware Included:

• (1) Mounting screws (C)

• (2) Green ground screws (B)

• (3) Plastic wire caps (A)

• (4) Canopy screws ( D )

To install you will need:

• Electrical tape

• Screwdriver

globe pendant

5388285/5567557 - 03/08

grounding screw 2x

canopy screws 4x

mounting screws

wire caps

To Assemble:

1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER.

2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace.

3. Place the shade canopy (I) onto the lamp socket (G)

4. Screw the metal ring (J) onto the lamp socket (G)

5. Hang up the glass shade (K) on the shade canopy (I).

6. Tighten the shade canopy (I) by the screw cap (H).

7. Carefully inspect the chandelier's fixture wires. The NEUTRAL FIXTURE WIRE is

white or marked “N”. The HOT FIXTURE WIRE is black or marked “L”. The

yellow-green or bare wire is the GROUND WIRE.

A
E