West Elm Deep Framed Wall Mirror Montageanweisungen
Page of
mounting instructions
A
B
! For drywall mounting, use anchors with screws.
! For stud mounting, use screws only.
! For stud mounting, use screws only.
deep framed wall mirror
NOTE
• Stud mounting is recommended. When in doubt, consult
your local hardware store. For your safety, installation by two
people is strongly recommended.
• Stud mounting is recommended. When in doubt, consult
your local hardware store. For your safety, installation by two
people is strongly recommended.
• Wipe frame with a soft, dry cloth. To protect the finish, avoid
the use of all chemicals and household cleaners.
the use of all chemicals and household cleaners.
. Place the template at the desired location on wall and
ensure that the template is level. Using a pencil, mark the
locations on the wall as shown. This is where the hardware
will be inserted.
ensure that the template is level. Using a pencil, mark the
locations on the wall as shown. This is where the hardware
will be inserted.
2. For stud mounting: skip to step 3. For drywall mounting:
using a Philip’s head screwdriver, insert the drywall anchors
(A) into the wall at the insertion points. Press and turn clock-
wise until anchors are flush with the wall.
using a Philip’s head screwdriver, insert the drywall anchors
(A) into the wall at the insertion points. Press and turn clock-
wise until anchors are flush with the wall.
3. Insert screws (B) into the anchors or at the insertion
points, leaving approximately /2” between the back of the
screw head and the wall.
points, leaving approximately /2” between the back of the
screw head and the wall.
4. Align keyhole notches over the screw heads.
5. Slide the mirror down until it rests on the screws. Tighten
or loosen screws as needed to fit the shelf snugly against the
wall.
or loosen screws as needed to fit the shelf snugly against the
wall.
drywall anchor 2x
screw 2x
7806888/7806862/7806870—03/06