White Rodgers F95-391 Benutzeranleitung

12

(Bypassing the Program)
Your White-Rodgers 90 Series
thermostat can be used to control
temperature manually (without
programming). For manual operation,
press 

 to select HEAT

 or

COOL, then press PROGRAM

Use 

 or 

 to set the

temperature as desired.

The sample schedule (pages 14 & 15)
shows the factory-installed programs
for heating and cooling. The heating
and cooling programs are separate,
and must be programmed individually.
To use the factory program, set the
clock and press PROGRAM 

with the thermostat set to Heat, Cool,
or Auto. Fill out the blank schedules
(pages 16 & 17) with the time and
temperatures you want in your
program. Fill in every space for your
program.The same temperature can be
repeated more than once if you do not
want the temperature to change over
several time periods. This is useful for
homes or businesses that are occupied
all day and only want a setback
temperature at night.

1. Press PROGRAM 

.

2. Press SET 

. The display will

show the hour. Use TIME 

 or

TIME 

 to set to the current hour

and AM/PM designation.

3. Press SET 

 again. The display

will show minutes. Use TIME 

or TIME 

 to set to the current

minutes.

4. Press PROGRAM 

.

To Set the Day:

5. Press SET 

. The display will

indicate a day of the week. Use TIME

 or TIME 

 to set to the

current day of the week.

6. Press PROGRAM 

.

To Set the Program:

7. Press the 

 button to select

 (for heating program) or 

(for cooling program).

8. Press PROGRAM 

 one time.

The display will show 

, the

settings for time and temperature and

.