Whirlpool Range W10234647A Benutzerhandbuch

Seite von 24
9
Cleaning Method:
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner and Polish Part Number 31462B (not 
included): See cover for contact information.
Liquid detergent or all-purpose cleaner: Rinse with clean water and 
dry with soft, lint-free cloth.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust removers, 
ammonia or sodium hydroxide (lye) because paint surface may 
stain. 
CERAMIC GLASS (on some models)
Cleaning Method:
Cooktop Cleaner Part Number 31464B is recommended regularly 
to help avoid scratches, pitting and abrasions and to condition the 
cooktop.
Cooktop Scraper Part Number WA906B is also recommended for 
stubborn soils. These can be ordered as accessories. See cover for 
contact information. The Cooktop Scraper uses razor blades. Store 
razor blades out of the reach of children.
Do not use steel wool, abrasive powder cleansers, chlorine bleach, 
rust remover or ammonia because damage may occur.
Light to moderate soil
Clean with paper towels or clean damp sponge
Sugary spills (jellies, candy, syrup)
Clean with cooktop scraper and cooktop cleaner. Scrape off 
sugary spills while the cooktop is still warm. You may want to 
wear oven mitts while cleaning the cooktop.
Heavy soil, dark streaks, specks and discoloration
Clean with Cooktop Cleaner or nonabrasive cleanser:
Burned-on soil
Clean with Cooktop Cleaner and Cooktop Scraper. 
Metal marks from aluminum and copper
Clean with Cooktop Cleaner as soon as cooktop has cooled 
down. The marks will not totally disappear, but after many 
cleanings they will become less noticeable.
Tiny scratches and abrasions
Use Cooktop Cleaner for scratches. Scratches and abrasions 
do not affect cooking performance, and after many cleanings 
they will become less noticeable.
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool, 
abrasive cleansers or oven cleaner.
Do not soak knobs. When replacing knobs, make sure knobs are in 
the OFF position.
On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water: Pull knobs straight away from control panel to 
remove.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge: Apply glass cleaner to 
soft cloth or sponge, not directly on panel.
All-Purpose Appliance Cleaner Part Number 31682B (not 
included): See cover for contact information.
OVEN RACKS
Cleaning Method:
Steel-wool pad
For racks that have discolored and are harder to slide, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.
STORAGE DRAWER OR WARMING DRAWER
Check that storage drawer or warming drawer is cool and empty 
before cleaning.
Cleaning Method:
Mild detergent
Oven Light
The oven light is a standard 40-watt appliance bulb. Before 
replacing, make sure the oven and cooktop are cool and the 
control knobs are in the off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven 
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
Appliance Outlets
The 120v appliance outlet located on the control console may be 
used to run portable appliances placed on countertops beside the 
range.
The outlet operates independently and is not affected by range 
control settings.
NOTE: Do not place portable appliances on the cooktop. Damage 
to the portable appliance could result if the cooktop is hot.
Appliance Outlet Circuit Breaker:
The circuit breaker for the appliance outlet on your range is located 
next to the outlet. It is rated for 12 amps. 
If the circuit breaker trips, it can be reset by pressing the switch. A 
delay of several minutes may be required for the circuit breaker to 
cool before it will reset.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference the Customer Service section to possibly avoid the cost 
of a service call. www.maytag.ca
Nothing will operate
Is the power supply cord unplugged?
Plug into a grounded outlet.
Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.