Whirlpool W10531342A Benutzerhandbuch

6. Repeat steps 1 and 2 to ensure that the range foot is 

engaged in the anti-tip bracket.

If the rear of the range lifts more than ½" (1.3 cm) off the floor 
without resistance, the anti-tip bracket may not be installed 
correctly. Do not operate the range without anti-tip bracket 
installed and engaged. Please reference the “Assistance or 
Service” section of the Use and Care Guide, or the cover or 
“Warranty” section of the User Instructions, to contact 
service.

1. Place a standard flat rack in oven. 

2. Place level on the rack and check levelness of the range, first 

side to side; then front to back.

3. If range is not level, pull range forward until rear leveling leg is 

removed from the anti-tip bracket. 

4. Use

 a ³⁄₈" drive ratchet and slip-joint pliers to adjust leveling 

legs up or down until the range is level. 

5. Push range back into position. 

6. Check that rear leveling leg is engaged in the anti-tip bracket.

NOTE: Range must be level for satisfactory baking 
performance.

*NOTE: Metal battery top is included in the bag containing 
literature.

To install or replace the 9V DC alkaline battery, follow the steps 
below.

1. Open the broiler door.

2. Remove broiler pan and grill from broiler.

3. Using a Phillips screwdriver, remove the metal battery top 

from the bottom of the range and open the plastic battery 
box.

A

B

A

C

D