Whirlpool W10531342A Benutzerhandbuch

The installation of this range must conform to the Manufactured 
Home Construction and Safety Standard, Title 24 CFR, Part 3280 
(formerly the Federal Standard for Mobile Home Construction 
and Safety, Title 24, HUD Part 280). When such standard is not 
applicable, use the Standard for Manufactured Home 
Installations, ANSI A225.1/NFPA 501A or with local codes.

■

When this range is installed in a mobile home, it must be 
secured to the floor during transit. Any method of securing 
the range is adequate as long as it conforms to the standards 
listed above.

Cabinet opening dimensions shown are for 25" (64.0 cm) 
countertop depth, 24" (61.0 cm) base cabinet depth and 36" 
(91.4 cm) countertop height.

If the cabinet depth is greater than 24" (61.0 cm), oven frame 
must extend beyond cabinet fronts by ½" (1.3 cm) minimum.

NOTE: 24" (61.0 cm) minimum when bottom of wood or metal 
cabinet is covered by not less than 

¹⁄₄" (0.64 cm) flame retardant 

millboard covered with not less than No. 28 MSG sheet steel, 
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 
0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking 
platform and the bottom of an uncovered wood or metal cabinet.

IMPORTANT: If installing a range hood or microwave hood 
combination above the range, follow the range hood or 
microwave hood combination installation instructions for 
dimensional clearances above the cooktop surface.

This range is equipped with an electronic ignition system that 
works with an 9V DC alkaline battery (not included). See the 
“Installing/Replacing Battery” section for instructions on installing 
and replacing the battery.

¹⁄₈

¹⁄₂

A

B

C

D

E

F

G

H

I

K

J