Whirlpool TGS325E Benutzerhandbuch

Seite von 36
28
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE:
 If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails or
screws may be used. Be careful that the length of
the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
To remove:
1.
Open the door about halfway. Insert door
removal pins into both
hinge hangers. Do not
remove them while the
door is removed from
the range.
2.
Close the door as far as the door removal pins
will let you.
CARING FOR YOUR RANGE
L
IFT
-
UP
 
COOKTOP
 
AND
 
SURFACE
 
BURNERS
 
(
CONT
.
)
8.
 Replace the surface burner grates.
7.
 To lower the cooktop, lift the cooktop from both
sides while pressing the
support rods back to
unlock them. Lower the
cooktop into place.
R
EMOVING
 
THE
 
OVEN
 
DOOR
Insert door removal
pin here
Oven door
Hinge
hanger
Range
3.
Rotate the door toward the range. Lift up the
door until it stops. Do
not use the door handle
to lift the door. Rotate
the door toward the floor
and pull it toward you.