Whirlpool SF315PEPB0 Benutzerhandbuch

Seite von 48
8
Use the following chart as a guide for cookware material 
characteristics.
ELECTRONIC OVEN CONTROL
Display
When power is first supplied to the appliance, “PF” will appear on 
the display. Press OFF/CANCEL to clear. 
If “PF” appears at any other time, a power failure has occurred. 
Press OFF/CANCEL and reset the Clock if needed.
When the oven is in use, the display shows preheat time and the 
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using COOK TIME (on some models) the display will show 
either hours and minutes, or minutes and seconds.
Oven Indicator Lights
The indicator lights are located along all four sides of the display. 
The indicator lights light up or flash when the oven is in one of the 
following modes: Bake, Broil, Clean (on some models), On, 
Start?, Controls Locked, Door Locked (on some models), Delay, 
Timer, Temp, Cook Time, or Start Time.
Start/Enter
The START/ENTER pad begins any oven function except the 
Timer. On some models, if pad is not pressed within 5 seconds 
after pressing a function pad, the “Start?” indicator light will flash 
as a reminder. On some models, “START?” will appear on the 
display.
If not pressed within 4 to 5 minutes (depending on your model) 
after pressing a function pad, the oven display will return to the 
time of day mode and the programmed function will be canceled.
Off/Cancel
The OFF/CANCEL pad stops any function except the Clock, 
Timer and Control Lock.
The cooling fan may continue to operate after an oven function 
has been canceled, depending on oven temperature.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Touch CLOCK.
2. Touch the “up” or “down” arrow pads to set the time of day.
3. Touch CLOCK or START/ENTER.
Timer
The Timer can be set in hours or minutes up to 12 hours and 
59 minutes, and counts down the set time either in hours and 
minutes, or in minutes and seconds. The Timer does not start 
or stop the oven.
To Set:
1. Touch TIMER.
The Timer indicator light will light up.
2. Touch the “up” or “down” arrow pads to set the length of time 
to cook.
3. Touch START/ENTER.
When the Timer has finished counting down, four one-second 
tones will sound.
To display the time of day at any time during timed cooking, 
touch CLOCK once
4. Touch TIMER twice at any time during Timer operation to 
cancel the Timer.
The time can be reset during the countdown by repeating the 
above steps.
Control Lock
The Control Lock shuts down the control panel pads to prevent 
unintended use of the oven.
COOKWARE
CHARACTERISTICS
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for 
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or 
Ceramic glass
Follow manufacturer’s instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat 
settings.
Copper
Heats very quickly and evenly.
Earthenware
Follow manufacturer’s instructions.
Use on low heat settings.
Porcelain 
enamel-on-
steel or 
cast iron
See stainless steel or cast iron.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper 
on stainless steel provides even 
heating.
A. Oven display
B. Clock
C. Timer/Cancel
D. Start/Enter (Control lock)
E. Off/Cancel
 F. Temperature/Time
 G. Cook time
 H. Start time
  I. Custom broil
 J. Bake
A
B
C D
E
J
I
H
G
F