Whirlpool SF315PEPB3 Benutzerhandbuch

The oven bottom can be removed for standard cleaning of the 
oven.

Before cleaning, make sure the oven is completely cool.

1. Remove the oven racks.

2. Place fingers in the slots in the bottom panel.

3. Lift the rear of the panel up and back.

The lip at the front of the panel should clear the front frame of 
the oven cavity.

4. Lift the bottom up and out.

Reverse the steps above.

■

Is the power outlet properly wired and polarized?
Try another outlet to check for proper wiring and polarity.

■

Is the power supply cord unplugged?
Plug into a properly grounded 3 prong outlet.

■

Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit.

■

Is the main or regulator gas shutoff valve in the off 
position?
See Installation Instructions.

■

Is the range properly connected to the gas supply?
Contact a trained repair specialist or see Installation 
Instructions.

■

Is this the first time the surface burners have been used?    
Turn on any one of the surface burner knobs to release air 
from the gas lines.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Are the burner ports clogged?
On sealed burner models, see “Sealed Surface Burners” 
section.
On open burner models, see “Surface Burners” section.

■

Are the burner ports clogged? 
On sealed burner models, see “Sealed Surface Burners” 
section.
On open burner models, see “Surface Burners” section.

■

On models with caps, are the burner caps positioned 
properly?
See “Sealed Surface Burners” section.

■

Is the burner damaged?
On models with caps, look for warped cap. Place cap, flat 
side down, on a flat surface. If cap wobbles noticeably, it is 
warped. Place cap on different burner for further check of 
warping. Replace warped cap. Contact a trained repair 
specialist if the condition does not improve.

■

Is the air/gas mixture correct?
Contact a designated service technician to check the air/gas 
mixture, or see the Installation Instructions.

■

Is propane gas being used?
The appliance may have been converted improperly.    
Contact a trained repair specialist.

■

Is the burner wet?
Let it dry.

■

Is the range level?
Level the range. See the Installation Instructions.

■

Is the proper cookware being used?
Use cookware with a flat bottom. See “Cookware” section.

■

Is the cookware the proper size?
Use cookware about the same size as the surface cooking 
area, element or surface burner. Cookware should not extend 
more than 1" (2.5 cm) outside the cooking area.

■

Are the right side surface burners rotated toward each 
other?
See “Burner Rotation” section.

A