Whirlpool SES374H Benutzerhandbuch

Seite von 40
18
PRESS
YOU SEE
ON
(factory setting of “0”)
BAKE
NOTE: DO NOT measure the oven temperature with 
a thermometer. Opening the oven door will lower 
the oven temperature and give you an incorrect 
reading. Also, the thermometer temperature reading
will change as your oven cycles.
6.
When baking, put your food in the oven after the
preheat conditioning time ends.
During baking/roasting, the elements will turn on 
and off to keep the oven temperature at the setting. 
NOTE: The top element helps heat during
baking/roasting, but does not turn red.
7.
After cooking, turn off the oven.
USING YOUR RANGE
B
AKING
/
ROASTING
(
CONT
.
)
PRESS
YOU SEE
OFF
CANCEL
(time of day or minute
timer countdown)
Saving energy
To avoid loss of heat, open the oven door as little
as possible.
Use a timer to keep track of cooking time.
Plan your meals for the most efficient use of the
oven by cooking more than one food at a time, or
baking while the oven is still hot after cooking a
meal.
Although your new oven is properly adjusted to 
provide accurate temperatures, it may cook faster or
slower than your old oven.
If you are not satisfied with the baking/roasting
results, you can change the offset temperature by
following the steps below.
1.
Press and hold BAKE for 5 seconds.
The display will show the current offset 
temperature, for example “00,” if you have not
already adjusted the temperature.
A
DJUSTING THE OVEN TEMPERATURE CONTROL