Whirlpool SES374H Benutzerhandbuch

Seite von 40
29
1.
Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 3
1
2
-hour 
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down 
1
2
hour before the cycle is over.
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or 
shorter than 3
1
2
hours, use the hour and minute
pads to set the cleaning time you want. Press 
the “up” (s) or “down” (t) pad(s) until a time be-
tween 2
1
2
-4
1
2
hours shows on the display.
Use 2
1
2
hours for light soil.
Use 3
1
2
-4
1
2
hours for average to heavy soil.
3.
Start the oven.
The on and heat indicator lights will light up.
NOTES: 
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
Do not attempt to open the oven door while
locking.
4.
After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5.
After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
6.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or
sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
S
ETTING THE CONTROLS
USING THE SELF-CLEANING CYCLE
AUTO
CLEAN
PRESS
YOU SEE
PRESS
YOU SEE
TIME
(example shows 4
1
2
-hour 
cleaning time)
PRESS
YOU SEE
START
5 SEC
ENTER
ON
ON
ON
ON
PRESS
OFF
CANCEL
YOU SEE