Whirlpool SES374H Benutzerhandbuch

CARING FOR YOUR RANGE

R

EMOVING THE OVEN DOOR

(

CONT

.

)

T

HE OVEN LIGHT

To replace the oven light:

Unplug range or disconnect power.

Remove the glass bulb cover in the back of 

the oven by turning 
it counterclockwise.

Remove the light bulb from its socket. Replace
the bulb with a 40-watt appliance bulb.

Replace the bulb cover by turning it clockwise. 

Plug in range or reconnect power.

NOTE: The oven light will not work during the 
Self-Cleaning cycle.

Hold oven door so that the top edge of each
hinge hanger is horizontal. Insert hinge hangers
into the front frame hinge slots.

Rotate top of door toward range. Slide hinge
hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully
seated and engaged on the support pins.

4. Insert the door stop clip with the angular surface

at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.

Open the door completely and remove the door
removal pins. Save door removal pins for future
use.

Close the door.