Whirlpool RS696PXE Benutzerhandbuch

14

The command pads tell the oven what to
do and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on
when you press the Start/Enter pad for an
oven function.

The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).

Control lock is only available when oven
is not in use or control has not been set.

Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.

After programming a function, you must

press the Start/Enter pad to
start the function. If you do not
press the Start/Enter pad within
5 seconds of programming,
“START?” will show on the display

as a reminder. The control will return to time
of day mode after 5 minutes if Start/Enter is
not pressed.

The Off/Cancel pad will cancel any function

except for the Clock and Timer Set
functions. When you press the Off/
Cancel pad, the display will show
the time of day or, if Minute Timer
is also being used, the time

remaining. To cancel the Minute Timer see
“Using the electronic Minute Timer” section.

Press and hold the Start/Enter pad for

5 seconds. A single tone will sound
and “Loc” and 

 will appear on

the temperature display. When the
control is locked, “START?” will
appear on the display if you press

any command pad.

Press and hold the Start/Enter pad for

5 seconds. A single tone will
sound and “Loc” and 

 will

disappear from the temperature
display.

 You may hear a fan blowing in the

oven even after you press the Off/Cancel
pad. This is the cooling fan. It will turn off
when the oven cools down.