Whirlpool CGS365H Benutzerhandbuch

Seite von 32
SETTING
LIGHT
HIGH
Mid-range
(between HIGH
and LOW)
LOW
6
U
SING
Y
OUR
R
ANGE
U
SING THE SURFACE BURNERS
NOTE: Do not leave empty cookware, or cookware
which has boiled dry, on a hot surface burner. The 
cookware could overheat, causing damage to the
cookware or cooking product.
Easy ways to save energy
When heating large quantities of liquid for foods
such as pasta or soup, cover with a lid to help
shorten cooking time.
Preheat your pots and pans only when 
recommended and for the shortest time possible.
Start your food on a higher heat setting, then turn
the control to a lower setting to finish cooking.
w
WARNING
Fire Hazard
Do not let the burner flame extend beyond 
the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can 
result in death or fire.
RECOMMENDED USE
To light the burner. 
To start food cooking.
To bring liquid to a boil.
To hold a boil.
To fry chicken or pancakes.
For gravy, pudding, and icing.
To cook large amounts of
vegetables.
To keep food warm.
To melt chocolate or butter.
To simmer.
Burner heat settings
Use the following chart as a guide. 
Using the control knobs
Your range comes with electric ignitors. Electric
ignitors automatically light the burners each time
you turn the control knobs to LIGHT.
Place a filled pan on the burner grate before
turning on the surface burner. Do not operate a
burner for extended periods of time without
having cookware on the grate.
Push in the control knob and turn it counter-
clockwise to the
LIGHT position. The
clicking sound is the
ignitor sparking. Make
sure the burner has lit.
To stop the clicking
sound after the burner
lights, turn the control
knob to the cook setting
you want. You can set
the control knob 
anywhere between HIGH and LOW.
NOTE: All four electric ignitors will click at the same
time. However, the burner with the control knob
turned to LIGHT is the one that will ignite.