Whirlpool WOS51EC0AS Installationsanweisungen

1. Decide on the final location for the oven. Avoid drilling or 

cutting into house wiring during installation. 

2. To avoid floor damage, set the oven onto cardboard prior to 

installation. Do not use handle or any portion of the front 
frame for lifting.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag 

containing literature.

5. Remove and set aside racks and other parts from inside the 

oven.

6. If installing a single oven below a cooktop, remove the 

adhesive backing from the foam strip and press it to the back 
of the control panel.
NOTE: When the cooktop is installed in the cabinet, the top 
edge of the foam strip should be approximately 

³⁄₈" (10 mm) 

from the top edge of the control panel. Make sure the foam 
strip is positioned against the cabinet face.

7. Move oven and cardboard close to the oven’s final location.

IMPORTANT: Use both hands to remove oven door(s).

1. Open the oven door.

2. Locate the oven door latches in both corners of the oven 

door, and rotate the latches forward to the unlocked position.

3. Grasp the edges of the oven door with both hands and close 

the oven door until it will no longer close. Lift and pull oven 
door toward you and remove. Set the oven door(s) aside on a 
covered work surface.

A

A

B