Whirlpool GMC275PD Benutzerhandbuch

As the countdown ends, the set temperature 
replaces “PrE” on the display. You will also hear a 
1-second tone.

NOTES:

You can change the temperature setting any
time after pressing START/ENTER. 

The display will show “door” and the heating 
elements will not heat if the door is open when
you try to bake/roast.

During baking/roasting, the elements will turn on
and off to keep the oven temperature at the setting.

To avoid loss of heat, open the oven door as little as
possible.

Use a timer to keep track of cooking time.

Plan your meals for the most efficient use of the
oven by cooking more than one food at a time, or
baking while the oven is still hot after cooking a
meal.

11

CANCEL

Although your new oven is properly adjusted to 
provide accurate temperatures, it may cook faster or
slower than your old oven.

If, after using the oven for a period of time, you are not
satisfied with the baking/roasting results, you can change
the offset temperature by following the steps below.

NOTE: DO NOT measure oven temperature with a
thermometer. Opening the oven door will lower the
oven temperature and give you an inaccurate reading.
Also, the thermometer temperature reading will
change as your oven cycles.

The display will show the current offset 
temperature, for example “0,” if you have not 
previously adjusted the temperature.

Press the “up” (

▲

) pad to raise the temperature or

the “down” (

▼

) pad to lower the temperature in

10°F amounts. You can set the temperature change
to as low as -30°F or as high as +30°F. A minus (-)
sign will appear before the number when decreas-
ing the temperature setting to show the oven will be
cooler by the displayed amount. There is no sign in
front of the number when increasing the 
temperature setting.