Whirlpool Double Oven W10526072A Benutzerhandbuch
10
3. Flip the regulator pin over and snap pin firmly into place.
4. Screw the hex-shaped regulator cap securely back into
place. Do not overtighten.
To Convert Bake/Broiler Burner
1. Remove racks from inside the broiler cavity.
2. Screw the burner orifice hood down tight against the pins. Do
not overtighten.
NOTE: On units using Eaton Oven Safety Valve, screw the
valve orifice hood down tight against the valve body. It is
important that the hood be turned down as far as it can go to
ensure complete conversion has occurred.
valve orifice hood down tight against the valve body. It is
important that the hood be turned down as far as it can go to
ensure complete conversion has occurred.
3. Adjust burner air shutter to the widest opening that will not
cause the flame to lift or blow off the burner when cold.
Natural Gas Conversion
1. Turn manual shutoff valve to the closed position.
2. Unplug oven or disconnect power.
To Convert Gas Pressure Regulator
1. Locate gas pressure regulator in bottom compartment.
IMPORTANT: Do not remove the gas pressure regulator.
A. Natural gas position
B. LP gas position
B. LP gas position
A. Burner orifice hood
A
B
A
A. To oven
B. Shutoff valve (closed position)
B. Shutoff valve (closed position)
C. Gas supply line
A. Gas pressure regulator
B. Gas supply line
B. Gas supply line
C. Electrical disconnect
D. Serial plate
E. Manual oven valve
F. Burner rating plate
F. Burner rating plate
G. Manifold pressure tap
A
B
C
A
B
C
D
E
F
G