Westell Technologies 36R570 Benutzerhandbuch

Seite von 59
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
030-300153A
10
WireSpeed Pro Installation
LED Indicators
The LED indicators shown in Figure 4 are used to verify the unit’s operation and status.
Connections are
 located on the side
Power
Ready
Link
Activity
Figure 4.  WireSpeed Pro Proxy Router (Front)
LED
State
Description
Solid Green
Power ON
POWER
No Light
No power
Slow Flashing Green
Power ON and passed power-up diagnostics (1 flash/sec)
Moderate Flashing Green
Power ON and attempting synchronization (2 flashes/sec)
Solid Green
Power ON and synchronized with the ADSL line card
Solid Red
Hardware power-up in progress
Blinking Red
Unit failed power-up diagnostic
Alternating Red/Green
Proxy Router diagnostic failed
READY
No Light
No power
Solid Green
Link established
LINK
No Light
No 10Base-T link
Pulsing Yellow
Data being transmitted.  Pulses should match the
reception or transmission of Ethernet data.
ACTIVITY
No Light
No data on Ethernet interface
Table 4. LED States
Note:  Modem LEDs will flash while powering up.  This intermittent flashing should not be confused with actual operation
status.