Weed Eater 532 43 46-60 Benutzerhandbuch

1.  Lower mower to lowest position to allow access to front 

axle.

2.  Turn steering wheel all the way to the right, for access 

to left side of axle

3.  With extension and socket, insert bolt, lock washer, 

and washer through hole in axle.

NOTE: Insert hardware from rear of axle.
4.  Hold counterweight up to axle and start threading 

bolt.

5.  Repeat steps 2-3 from right hand side.
IMPORTANT: Torque bolts until tight.

Ensure deck is properly leveled for best mower per for mance.  

See your riding mower owner's manual for instructions.