Sharp SD-HX600 Benutzerhandbuch
E-60
SD_HX600_SEC_SECL_E6.fm
04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
Ad
v
a
nced
F
e
atures
-
M
ount
in
g the
u
n
it on the
wa
ll -
!
Mounting the wall bracket on the wall
VESA (*) compliant fittings (commercially available) can be attached to the wall
bracket.
Fittings are not supplied, but can be purchased.
bracket.
Fittings are not supplied, but can be purchased.
Note:
Types of fittings:
Fittings must satisfy the following.
"
Compatible with the VESA standard.
"
Have a gap of 3.973" (100 mm) 3.973" (100 mm) between the screw holes on the
section to be attached.
section to be attached.
"
Sturdy and stable to prevent fall or breakage.
How to attach fittings
"
There are four VESA (*) screw holes on the wall bracket. You can use commer-
cially available fittings for mounting.
cially available fittings for mounting.
"
Follow the method recommended by the bracket manufacturer.
Warning:
"
Install brackets properly following the operation manual. Improper installation may
cause the main unit to fall leading to injury or breakage.
cause the main unit to fall leading to injury or breakage.
"
To ensure a proper installation, contact your dealer or installer.
"
During installation, be careful not to pinch your fingers.
"
The wall should be strong enough to support the weight of the main unit. (Install
on a reinforced part.)
on a reinforced part.)
"
Do not impose an extra load on fittings. It may cause the main unit to fall leading to
injury or breakage.
injury or breakage.
"
Do not modify or change the wall bracket. It may cause the main unit to fall leading
to injury or breakage.
to injury or breakage.
Caution:
"
Do not block the ventilation opening of the main unit with a tablecloth, etc. Heat
may be kept inside causing fire.
may be kept inside causing fire.
"
Select a mounting position carefully to avoid injury by hitting head.
"
Never step on or hang from the main unit. Pay special attention to children. It may
cause injury or breakage to the main unit.
cause injury or breakage to the main unit.
"
Check the wall strength. SHARP is not liable for accidents caused by insuffi-
cient strength of the wall or improper mounting.
cient strength of the wall or improper mounting.
"
Improper mounting may cause the main unit to fall. If you need assistance,
contact your dealer or installer.
contact your dealer or installer.
(*)
VESA (Video Electronics Standards Association) is an organization to promote
the standardization of digital imaging device for PCs.
the standardization of digital imaging device for PCs.
3.973" (100 mm)
3.973"
(100 mm)
(100 mm)