GE ISOVOLT Titan E Broschüre

We reserve the right to technical modifications without prior notice.

Xray

Xray

©2004 General Electric Company. All rights reserved.

   GEIT-30066GB (5/04)

GEInspectionTechnologies.com

The OLK 50 is an air-cooled refrigeration 
aggregate designed to facilitate anode 
heat dissipation of the X-ray tube when 
operating at high ambient temperatures 
(up to 40° C) and can also be used when, 
for economical reasons a re-cooling of the 
tube-cooling oil from the water supply is 
not feasible.

The design allows the cooling aggregate to 
transfer the heat from the X-ray tubes to 
the ambient air. Therefore, sufficient fresh 
air supply must be guaranteed.

For operation at up to approximately  
20°C we recommend the oil cooling  
pump OL 4503. 

If re-cooling from the water supply is 
available, the oil cooling pump OW 4002 
is recommended.

The aggregate is mounted in a square 
tube frame and is mobile on 4 castors.

Equipped with CFC-free coolant.

Dimensions and weight 

height 

925 mm / 36.4”

 

width 

612 mm / 24.1”

 

length 

590 mm / 23.2”

 

weight 

approx. 180 kg / 396 lbs without oil

 

capacity  

25 liters

Characteristics 

cooling power 

5000 W at 32°C ambient temperature

 

oil flow rate 

> 22 l/min at 4.0 bar

 

power connection 

3N PE 400/230 V, 50 Hz

 

max. mains current 

8.2 A

 

noise level  

< 70 dB(A) (in a distance of 1 m (3.2 ft))

Environmental conditions 

operating temperature 

+ 5° C ... + 40° C

 

storage temperature 

- 25° C ... + 70° C (with antifreeze filling)

 

humidity 

20 % ... 80 %

Coolant circuit 

cooling agent  

R 22 (CFC-free)

Settings 

pressure 

max. 9.25 bar

 

flow rate monitor OFF 

17 l/min

 

oil forward line (T1) 

20° C

 

temperature (T2) 

40° C

Compressor  

type 

TAH 4518 A

 

motor 

0.55 kW 

 

rated speed 

2900 min-1

Connecting cable 

5 x 1.5 mm

2

 

Grounding plug, length 10 m (32 ft)

 

5 x 1.5 mm

2

 

CECON plug, length 10 m (32 ft)