GE ISOVOLT Titan E Broschüre
GE
Inspection Technologies
Inspection Technologies
Oil Cooling Pump
OW 4002
Application
The OW 4002 is a water-recooled oil
circulation pump designed to facili-
tate anode heat dissipation of X-ray
tubes.
circulation pump designed to facili-
tate anode heat dissipation of X-ray
tubes.
The heat energy produced by the
X-ray tube is transferred via an oil/
water heat exchanger.
X-ray tube is transferred via an oil/
water heat exchanger.
The cooling aggregate is designed
for re-cooling of tube-cooling oil for
bipolar X-ray tubes. The water-cooled
oil circulation pump system can cool
X-ray tubes with 4200 W anode heat
dissipation under conditions of con-
stant operation if sufficient flow of
cooling water at a low enough tem-
perature is available.
for re-cooling of tube-cooling oil for
bipolar X-ray tubes. The water-cooled
oil circulation pump system can cool
X-ray tubes with 4200 W anode heat
dissipation under conditions of con-
stant operation if sufficient flow of
cooling water at a low enough tem-
perature is available.
A thermostat valve controls the oil
temperature and minimizes water
consumption.
temperature and minimizes water
consumption.
If, for economical or technical reasons,
a re-cooling of the tube-cooling oil
from the water supply is not feasible,
we recommend an air-recooled oil
circulation pump.
a re-cooling of the tube-cooling oil
from the water supply is not feasible,
we recommend an air-recooled oil
circulation pump.
The OW 4002 is equipped with a
fail-safe turbine flow rate monitor.
fail-safe turbine flow rate monitor.