UTStarcom PPC 6700 Benutzerhandbuch
70
|
Getting Connected
2.
Tap
Start > Settings > Connections tab > Connections.
3.
In
My Work Network, follow the instructions for each type of connection.
4.
Complete the connection wizard, and then tap
Finish.
To start browsing the Internet
• When the connection settings are completed, tap Start > Programs > Internet
Explorer.
To reset or modify the network card settings on your device
1.
1.
Tap
Start > Settings > Connections tab > Network Cards.
2.
In the
My network card connects to list, select the appropriate item:
• If you want to connect to the Internet using your ISP, select The Internet.
• If you want to connect to a private network, select Work.
• If you want to connect to a private network, select Work.
3.
In
Tap an adapter to modify settings, tap the appropriate adapter. The fields on the
IP Address tab are populated automatically.
4.
Configure the TCP/IP settings (if required). If your ISP or private network does not
use dynamically-assigned IP addresses, tap
Use specific IP address and enter the
requested information. Contact your ISP or network administrator to obtain the IP
address, subnet mask, and/or default gateway (if required).
5.
Configure the DNS and WINS settings (if required). If your ISP or private network
does not use dynamically-assigned IP addresses, enter the requested information on
the
Name Servers tab. Servers that require an assigned IP address may also require
a way to map computer names to IP addresses. DNS and WINS are the resolution
options supported on your device.