Utica Boilers UB95M-200 Verweisanleitung

Seite von 20
Parameter guide
95M-200
GAS-FIRED DIRECT VENT
MODULATING HOT WATER BOILER
 P/N 240006105, Rev. B [06/08]
Revise  boiler  control  parameters  only  if  you 
fully  understand  the  purpose  and  result  of  the 
changes and on the advice of Technical Support. 
Tampering  without  understanding  the  control 
settings  in  this  manual  will  void  the  warranty 
and can result in unreliable operation, with pos-
sible  severe  personal  injury,  death,  or  substan-
tial property damage.
WARNING
!
  
This document must only be used by a qualified 
heating  installer  or  service  technician.  Read  all 
instructions,  including  the  Installation  Manual 
(P/N# 240006103), the Control Manual and Oper-
ating  Instructions  (P/N#  240006104),  the  User’s 
Information  Manual  (P/N#  240006106),  and  this 
Parameter  Guide  before  attempting  to  program 
the control, and be sure to perform all steps in 
the order specified. Failure to comply could re-
sult in severe personal injury, death, or substan-
tial property damage.
WARNING
!
  
IMPORTANT:  Installation  must  comply 
with  local  requirements  and  with  the  Na-
tional Fuel Gas Code, ANSI Z223.1 for U.S. 
installations  or  CSA  B149.1  or  B149.2  for 
Canadian installations.
DO NOT DESTROY THESE INSTRUCTIONS!!
Please read carefully and keep in a safe place 
for future reference.