SonicWALL Webcam TZ 180 Benutzerhandbuch
SonicWALL TZ 180 Wireless Getting Started Guide
Page 19
Unable to See the Setup Wizard?
•
If you see the login screen, but not the Configuration Wizard:
•
•
Configure your Internet browser to allow popups for the SonicWALL TZ
180 Wireless.
180 Wireless.
•
Log into the security appliance using “admin” as the user name and
“password” as the password. After you log in, click the Wizards button
on the System > Status page.
“password” as the password. After you log in, click the Wizards button
on the System > Status page.
•
If you do not see the login screen or the Configuration Wizard:
•
•
Did you correctly enter the SonicWALL TZ 180 Wireless management
IP address, 192.168.168.168, in your Web browser?
IP address, 192.168.168.168, in your Web browser?
•
Is your computer set to accept DHCP addressing or set to a static IP
address within the 192.168.168.x subnet range? If not, see Appendix
A: Configuring DHCP IP Addressing section, on page 27 for
instructions on changing your Local Area Connection settings.
address within the 192.168.168.x subnet range? If not, see Appendix
A: Configuring DHCP IP Addressing section, on page 27 for
instructions on changing your Local Area Connection settings.
•
Do you have the Ethernet cable connected between your computer
and the LAN (1) port on your SonicWALL TZ 180 Wireless?
and the LAN (1) port on your SonicWALL TZ 180 Wireless?
•
Do you need to add the SonicWALL TZ 180 Wireless to your list of
trusted sites? Use the default IP address (192.168.168.168) for this
purpose.
trusted sites? Use the default IP address (192.168.168.168) for this
purpose.
•
Is the Test
LED on the front panel of your SonicWALL TZ 180
Wireless lit? If the Test LED stays lit for more than a few minutes after
the initial power on sequence, cycle power to the SonicWALL TZ 180
Wireless.
the initial power on sequence, cycle power to the SonicWALL TZ 180
Wireless.