Siemens AC75 Benutzerhandbuch

s

AC75_ATC_V01.002

Page 166 of 569

10/30/06

Confidential / Released

Disconnect existing call from command line by local TE and terminate call. 

[0]

disconnect from line and terminate call

• OK is issued after circuit 109 (DCD) is turned off, if it was previously on.
•

 terminates every circuit switched call (voice, data or fax), even if it is issued via another interface. This

behavior is in accordance with ITU-T V.250; (07/97, "Hook control": "

 is terminating any call in progress.").

•

 clears any active PDP context or terminates any existing PPP connection, but only if issued on the same

interface where GPRS is used and if there is no pending network request for PDP context activation. It does

not affect PDP contexts and PPP connections on other interfaces (see also Chapter "

 Manual rejection

of a network request for PDP context activation"). 

Exec Command

ATH

]

Response(s)

OK

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

V.250

<n>

(num)